SATRA
-
S-XBE
Innen Abzieher Mit Gleithammer Tool for mounting and dismounting bearings using a slide hammer 0.88 kg. Set: Slide weight 0.88kg x 185 mm 3pcs. Adapters M6 x 1.0 / 1.25 x M8 / M10 x 1.5(disassembly of threaded elements) 5p. Pins range of 8 – 34 mm (removal of the center bearing) Puller two -arm
-
S-BPS3
PRESS AND PULL SLEEVE SET 62/66/72mm VAG Professional set for installing and removing the wheel hub without removing components of the suspension. The use of this kit allows dismounting bearings- hub at the right angle, which is very important to prevent damage to housing and other elements. If the locking ring is damaged, there […]
-
S-FTS
3 LEG WAY FUEL FILTER SPIRAL WRENCH Satra fuel tank to remove the sender retaining ring, steel construction, Easy and Full adjustable, 3-LEG Type, Range 75-160mm and 24mm Drive.
-
S-DUBJ
UNIVERSAL BALL JOINT EXTRACTOR Allows removal of parts without the need for tools to striking. The design of puller allows you to work without damaging the joints casing. Range of work: A: 22mm, B: 62mm
-
S-20UBJ
PULLER FOR BALL JOINTS For removal of ball joints form steering rods.
-
S-27PPS
Bush Removal Set Pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal & installation of bushes, bearing and seals.The whole tool set is with fully universal application for cars, LGV or HGV. All is suited to silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals,rubber bearings, […]
-
S-5JPP
MERCEDES BALL JOINT PRESS ASSEMBLY DISASSEMBLY PRESS Assembly and disassembly ball joints at Mercedes W220 (S-TYPE 1998-2005), W211 (E-Type 2002-2009) and W230 (SL-Type from 2001). Satra Provides a heavy duty version for best performance. Set comes with: 1xSpindle M28 x 3.5 mm with a length of 196.5 and 24 mm hex drive 1x Adapter […]
-
S-XSA2
UNIVERSAL CLAMP FOR SHOCK-ABSORBING SPRINGS Suitable for shock absorbing springs. • Drive 1/2″ or wrench 21 mm • Working length: 260 mm • Overall length: 350 mm.
-
S-DMPR
STEERING RACK KNUCKLE TOOL Suitable for the fast and easy removal of steering knuckle. Range: ψ32-42 mm
-
S-B4SR
STEERING RACK KNUCKLE TOOL Set comes with 3x easy to exchangeable heads with a range of 30-35mm -40mm and 40 -45mm for removal or replacement of the inner steering ball joint – ON CAR. The set covers up most car models. The bar can be driven by a 1/2″ Ratchet or 27 mm wrench.