SATRA
-
A-GLOV8 / A-GLOV9 / A-GLOV10
Safety Gloves Protective gloves, seamless. Comfort, tactile sensitivity. Flexible, Perfectly matched to the hand. They do not cause hand fatigue during use with adequate ventilation. Foam nitrile foam coated resistance to wear and abrasion Excellent feeling of the object being held Increases resistance to grease oil Used for general mechanical work Standards: EN388 and PN-EN420
-
A-EAR
PU FOAM BULLET EARPLUG WITHOUT CORD Disposable earplugs are made of slow decompress of soft polyurethane foam used to protect hearing against excessive noise in the workplace. Conical shaped, which allows for adaptation to different size ear canal.
-
S-PS3X
SEAL PULLER SET Quickly and easily remove O-Ring or grease oil seal. Special angle on the tool head provides a better work than the traditional seal pullers. 3 different lenghts and tips fit nearly all seal applications. Lenghts: 117, 167, 150 mm
-
S-X946
CV BOOT CLAMP PLIERS For Bands on CV Boot Clamps, Fuel Line and Hoses Length:270mm Handles Covered with a flexible, non-slip coating Models: WV, Audi, Opel, BMW, Mercedes Benz, Honda, Nissan, Mazda.
-
S-DLOF38
KET FOR OIL FILTERS- TOYOTA Drive: 3/8″ or 24mm spnner size: 64.5mm x 14 with 6 slots Application: • Lexus 3.5i V6 GS300 (06-), IS250 (2006-), IS350 (2006-) ES350 (2007-) GS350 (2007-) GS460 (2007-) RX350 (2007-) LS600H (2008-); • Toyota (07-08) 3.5I V6
-
S-BR127A
BUSH REMOVAL SET Pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal & installation of bushes, bearings and seals. The whole tool set is with fully universal application for cars, LGV or HGV. All is suited to silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft […]
-
S-XTBT
TOOL FOR BELT TENSIONING Fast and precisen method of checking the tension of a timing belt. Important: The measurement of tension are given in the materials for mechanics.
-
S-5LFT
BRAKE FLUID TESTER The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of “per cent of water in the brake fluid” .
-
S-X2024T
LOCKING TOOL SET FORD 2.0 / 2.4 TDDI / TDCI Engines Type: FMBA/B, D5BA, ABFA, D3FA, D3FA, D2FA, D4FA, F4FA. Models: Ford: Mondeo, Transit (01-04). Engines: Tool for setting crankshaft Ø10; 3 x pin for setting crankshaft Ø6; 3 x Pin for setting crankshaft Ø1.9.
-
S-XM9R
TIMING TOOL KIT – RENAULT/NISSAN/OPEL Timing Tool in high end precession quality to block crankshaft to change the timing chain in 2.0 dCi, CDTI engines. Also for 2.3L – RENAULT MASTER Application: 2.0 dCi, CDTi; Nissan Primastar (09/08) / Qashqai (09/08) / X-Trail (07-08), Renault Laguna (05-08) / Megane (07-08) / Scenic (09/08) […]