SATRA
-
S-TG3
INFLATOR GUM Aluminium Die-cast body, 2” dial type gauge with rubber protector, Fitted with single clip-on connector, Pressure range:0-220PSI
-
S-SR10P
10” SNAP RING PLIERS SET Pliers for internal and external Seger rings. Pliers have ratchet holders with a locking function. The set includes interchangeable tips for a different range of use. Set: • Pliers length: 266mm. • 2.75 mm straight 0 ° ends, and with a bend: 15°, 45° and 90°. 285 • 3.00 […]
-
S-STR2
STRETCH FIT BELT TOOL -SET Universal installation and removal adapters of all stretch fit belts. Allows to remove and reuse the stretch fit belts.
-
S-419RA
METRIC UNIVERSAL O-RING SET ASSORTMENT number ø d1 d2 quantity number ø d1 d2 quantity R01 3 1.5 20 R17 20 3.5 10 R02 4.4 2 20 R18 22 3.5 10 R03 5 2 18 R19 23.5 3.5 10 R04 7 1.5 23 R20 25 3.5 10 R05 10 1.5 23 R21 26.5 3.5 […]
-
S-BK38X
38PCS 8-19mm UNIVERSAL l CLEANING BRUSH SET Perfect to clean injectors, cylinders, injector sockets, pipes and other elements required precision cleaning. Set includes: 12 x Stainless Steel Brush, 12 x Brass Brushes 12 x Nylon Brushes, Brushes are 4”long (2” brush, 2” Shank) with a 1/4” Hex Shank, 1x 5-3/4” quick release soft grip […]
-
S-TM6200
TORQUE MULTIPLIER A professional torque multiplier that allows you to unscrew the tight (sealed) screws with the reaction arm by using a smaller work force to achieve sufficient output torque without using impact blows. Trans-speed ratio:1:68, Max Torque Output: 6,200 Nm, Drive Square:1”, Material:40Cr, 1” Dr. Impact Sockets: 32 & 33mm
-
S-FCWU
10x FAN CLUTCH WRENCH SET To remove fan clutches when repairing or replacing water pumps, timing chains or fan clutch. All adapters are equipped with a square drive for use with a breaker bar for additional torque. Includes: • 2-1/4” & 3-1/4” fan pulley holding tools • 2-3/8” fan clutch bolt holding tool • […]
-
S-CROSS
WHEEL SPANNER CROSS 17, 19, 21,1/2” Wheel cross for car, truck and agricultural machinery use. High load capacity, made of Cr-V, sandblasted, chrome-plated, outer square 12.5 mm (1/2 „) and 17, 19, 22mm wrench size.
-
S-T300W
NEEDLE TORQUP WRENCH Ergonomic ½“ Drive reversible Needle torque wrench with a 0-300Nm – left/right scale. Scale divided by 10 Nm steps. Produced by Cr-V.
-
S-S12PC
UNIVERSAL LOCKING TOOL SET VAG SET: •2 x bushis for removal front strike; •Tool for tensioner; •Locking pin for fuel pomp; •Oxygen sensor socket.