SATRA
-
S-FTS
3 LEG WAY FUEL FILTER SPIRAL WRENCH Satra fuel tank to remove the sender retaining ring, steel construction, Easy and Full adjustable, 3-LEG Type, Range 75-160mm and 24mm Drive.
-
S-DUBJ
UNIVERSAL BALL JOINT EXTRACTOR Allows removal of parts without the need for tools to striking. The design of puller allows you to work without damaging the joints casing. Range of work: A: 22mm, B: 62mm
-
S-20UBJ
PULLER FOR BALL JOINTS For removal of ball joints form steering rods.
-
S-27PPS
Bush Removal Set Pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal & installation of bushes, bearing and seals.The whole tool set is with fully universal application for cars, LGV or HGV. All is suited to silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals,rubber bearings, […]
-
S-5JPP
MERCEDES BALL JOINT PRESS ASSEMBLY DISASSEMBLY PRESS Assembly and disassembly ball joints at Mercedes W220 (S-TYPE 1998-2005), W211 (E-Type 2002-2009) and W230 (SL-Type from 2001). Satra Provides a heavy duty version for best performance. Set comes with: 1xSpindle M28 x 3.5 mm with a length of 196.5 and 24 mm hex drive 1x Adapter […]
-
S-XSA2
UNIVERSAL CLAMP FOR SHOCK-ABSORBING SPRINGS Suitable for shock absorbing springs. • Drive 1/2″ or wrench 21 mm • Working length: 260 mm • Overall length: 350 mm.
-
S-DMPR
STEERING RACK KNUCKLE TOOL Suitable for the fast and easy removal of steering knuckle. Range: ψ32-42 mm
-
S-B4SR
STEERING RACK KNUCKLE TOOL Set comes with 3x easy to exchangeable heads with a range of 30-35mm -40mm and 40 -45mm for removal or replacement of the inner steering ball joint – ON CAR. The set covers up most car models. The bar can be driven by a 1/2″ Ratchet or 27 mm wrench.
-
S-B12BS
BEARING SPLITTER GEAR PULLER FLY WHEEL SEPARATOR SET Easy to remove bearings, inner rings, flywheels, drums and other components. 4x small tie rods for bearing-cutters 4x large tie rods for bearing-cutters 10cm train arms for plates & bearing Large cutting knife Small cutting knife Gable 4x hex push-puller legs Center adapter 4x extension legs
-
S-CSC
INNER SPRING COMPRESSOR KIT FOR MERCEDES COIL SPRING COMPRESSOR This tool can remove and install automotive coil springs to a range of 185 up to 380mm and 150 mm spring diameter, minimum width of the clamping arms 95 mm (important to access into the wishbone)