ASTA TOOLS LIMITED COMPANY

Suspension

  • A-SF53BA

    BRAKE ANCHOR PIN PRESS   Safely, quickly and easily remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems. •Don’t need to remove the hub or dust shield on the brake •Special design heavy duty c-frame with 10T capacity •High-grade steel for maximum strength and durability of the […]

  • A-35TC130

    UNIVERSAL OUTSIDE THREAD CHASER

  • A-P40IPS

    INJECTION PULLER SET

  • A-P6FD

    DRIVE FLANGE LOCKING TO To fix the drive shaft central screw and the drive shaft screw on the gearbox. The Puller can be used on a very wide range of cars and vans- max. One man operation!

  • S-26PPS

    BUSH REMOVAL  SET        Pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal & installation of bushes, bearings and seals. The whole tool set is with fully universal applica-tion for cars,LGV or HGV. All is suited to silent bearings, hydraulic bearings, bearing bushes, ball bearings, […]

  • A-SH970RL

    LEVER  FOR  REMOVING  WISHBONE HEADS & SHOCK ABSORBERS         Lever for removing wishbone heads and shock absorbers from pillar safe and convenient. For one man uperation           • Material: Steel.  • Lenght: 970mm  • Clamping height: 65mm to 265mm  • Chain length  including  • Hook: approx. 660mm

  • A-MK4B

    FORD MONDEO MK4 TRAILING ARM BUSH REMOVER  INSTALER    Ford Mondeo MK4 Trailing arm bush remover/installer Allows for easy removal and replacement of the rear trailing arm bushes without removing the trailing arm completely from the vehicle.       Applications: Ford: Mondeo III 07 upwards, S-Max 2006 upwards, Galaxy 2006 upwards Volvo: S60 & […]

  • A-P115

    CV BOOTGUN   Designed to stretch flexible CV Boots on the drive shaft. Prevents drive shaft from damages. The tool works with an air compressor at 4 – 7 bar maximum diameter 110 mm. CAPACITY: 20-110 mm WEIGHT: 2,4 kg

  • A-H190

    WHEEL HUB BEARING EXTRACTION & INSTALLATION SET TOOL SET VAG   Special kit for installing and removing bearings – wheel hub with a diameter of 90mm. The use of this kit allows disassembly of the bearing-hub at right angles which is very important to prevent damage to the chassis and other components. If the locking […]

  • A-H185

    BEARING FITTING & REMOVAL TOOL VAG Special kit for installing and removing bearings – wheel hub with a diameter of 85mm. The use of this kit allows disassembly of the bearing-hub at right angles which is very important to prevent damage to the chassis and other components. If the locking right is damaged, it does […]

Pages:123456»