Suspension
-
A-BG45
SILENT BLOCK TOOL SET BMW Kit designed for dismounting bearings blocks to the many BMW models. The set includes: The pressing elements for removing and inserting the ball joint at the rear wheel bracket Elements for the downloading and installation of the anchor rubber in the suspension gear at the rear axle and the […]
-
A-17UCA
UNIVERSAL CLUTCH ALIGNMENT TOOL SET Universal Clutch Centering Kit for most cars amd light commercial vehicles. Set Comes with Centering Shaft with 147mm length and 8 Conical Centering Adapter for Clutch Discs with Bore 14 to 16 mm 8 Adapter for Pilot Bearing for Centering in the Crankshaft in Size 10.7, 12.0, 13.8, 15.0, […]
-
A-MB5TS
DIFFERENTIAL GEAR MERCEDES-BENZ SOCKETS Specialist socket 1/2″ suitable differentials gear MERCEDES-BENZ. Applied to the front and rear axles. Material: Cr-Mo
-
A-BG57
TOOLS SET FOR SILNET BLOCKS VW T5 10 piece set is used for extrusion and deposition of the sleeve silent bloks at the axle VW T5 It also allows the use of a mechanical drive using the supplied included the spindle. Set: centring plate with spring 2 x thrust wash; adapter ring washer; […]
-
A-290
Kit Bearing Assembly And Disassembly Modelle:Mercedes Benz W124, W129, W201, W202
-
A-745
Tool For Installing And Removing The Swingarm Sleeve The instrument is used for mounting and dismounting arm sleeve for Mercedes Benz. Application: 190(W201),A124,CLK 208,CLK 209 | Klasa C 202-203 | Klasa E124-210 | Klasa S W140-124, SLR 129, SLK R170.
-
A-501B
Set For Assembly And Diassembly Wheel Hub Bearing Up-to-date kit for the installation and removal of front hub bearings without the need to dismantle the steering knuckle and assembly.Fast and simple to use. Suitable for most front wheel drive cars. | Sizes:size:55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm | Screws(po 3szt. […]
-
A-155OT
PIN WRENCH FOR SHOCK ABSORBER SCRWEING, MERCEDES 211T Shock absorber Pin wrench for Mercedes Benz Wrench to loosen the upper shock absorber screwing the recess in the front part of the pin wrench allows counterholding the piston rod. The Shaft of the wrench is covered to prevent damage. Used for Mercedes Benz 211 T-Model […]
-
A-6P
CAMBER ADJUSTMENT SET SET: AT-01:Nuts Hex 75mmL, 135mm AT-02:Nuts Hex 85mmL, 155mm AT-03:Nuts Hex115mmL, 175mm Application: AT-01 VW Golf,Jetta,Seat Toledo,etc AT-02 VW Polo from 95′,Seat Cordoba etc. AT-03 Chrysler Voyager etc.
-
A-1108
BUSH REMOVER / INSTALLER TOOL SET Puller to assemble and remove the upper bush. Application: VW T4 | VW LT