• A-127A

    Bush Removal Set Universal bush and bearing removal tool.SET: 4 pcs threaded bars 350mm-M10,M12,M14 i M16 | 20 internal adaptors ranging from 34 – 72 mm | 20 external adaptors ranging from 44-82 mm.

  • A-260A

    PRESS FILLING SEAL SET   Set used for the equiaxed mounting bearings, rings, seals, bushings and rollers. Possibility to use for most cars   SET: 1 x Pin length 145mm Ø 14mm 9 pieces in the size of the adapters: 40, 44, 50, 59, 62, 65, 72, 76, 81mm Diameter internal hole plate: Ø 14mm

  • A-1104

    Bush Removal With Press Set – 10T Designed for all cars and commercial vehicles. SET: 10 T hydraulic press | Adaptors for press | Spindle for press | Spindle for pressing | Bushes:26 x 18 | 28 x 20 | 30 x 22| 32 x 24| 34 x 26 | 36 x 28 | 38 […]

  • A-1020T

    INNER SPRING COMPRESSOR KIT FOR MERCEDES COIL SPRING COMPRESSOR   This Tool Remove and install automotive coil springs to a range of 185 up to 380 mm and 150 mm Spring diameter , minimum width of the clamping arms 95 mm (important to access into the wishbone)

  • A-1007G

    UNIVERSAL  STEERING  KNUCKLE  SPREADER  TOOL Suitable for Macpherson strut coil springs. Features a yoke extension bracket that also allows use on conical springs. Safety yokes carefully shaped to shop the spring bowing while under compression.   TECHNICAL DATA: Capacity: 1000 Kg Gold Yokes:Ø 80 – 105 mm Black Yokes: Ø 105 – 140 mm Silver […]

  • A-WBFF

    FORD TRANSIT FRONT  WHEEL  BEARING  TOOL  AND  INNER RING  PULLER  COMPLETE  SET    Special Designed ASTA Rear Hub Removal Tool for FORD Transit 2000 – up (front wheel drive)

  • A-SN005

    SPECIAL INSERTS FOR SHOCK ABSORBER BOLTS, 5-PCS   MATERIAL: Chrome vanadium steel, chrome matt finish. DRIVE:  Socket wrench 6-angle 22mm SIZES: •10.5 mm – VW Golf (tył) •12.5 mm – VW Polo (przód) •14.5 mm – Polo, Golf, Passat, Audi 80 •14.0 mm – Mercedes Benz – W209C (klasa C), W209 (CLK).

  • A-037A

    CVJ  REMOVAL  TOOL   Quickly removes the CVJ from the drive shaft without damaging joint. Reduces risk of damage transmission. Max. CVJ diameter: 95mm Lenght: 230mm

  • A-ST56M

    STRUT  WRENCH The tool was specially designed to remove or replace the rear shock absorbers on VW, Audi, Ford, Opel and Japanese Cars. The special wrench is equipped with an 5x8mm and 6x9mm oval opening.