SATRA
-
S-BBN4
LOCKING TOOL SET BMW Special design for locking camshafts TDC (Top Dead Centre) position. Engine Types: BMW N51 / N52 / N53 / N54. Models: Series 1-128i E82 (07-08); 130i E81 / E87 (05-08); 135iS E82 (07-08) | Series 3- 323i E90 / 91 / 92 / 93 (04-08); 325i / xi E90 […]
-
S-XN12P
ENGINE TIMING CHAIN SERVICE TOOL SET BMW/CITROEN/PEUGEOT Application: BMW Mini: R55 R56 Cooper S, R55 R56 Cooper, R56 Mini One Citroen: C4, C4 Picasso Peugeot: 207, 308 Engine: BMW: N12 (1.4 VTi/ 1.6 VTi), N14 (1.6 THP), PSA: EP3, EP6, EP6DT/DTS.
-
S-25VAG
CAMSHAFT ALINGNMENT TOOL SET VW Timing Tool for VW T5 (2004), TOUAREG and Phaeton (2003) with 5 and 10 Cylinder Engines VAG 2.5 and 4.9d TDI PD. Includes: Camshaft Locking Tool 10 Cylinder-OEM T10194 Clamping Device – OEM T10199 ,Rotating crankshaft Socket (5 Cylinder)-OEM T10225 and Crankshaft Locking Wrench (5 Cylinder) – OEM T10226. […]
-
S-X3CY
LOCKING TOOL SET VAG 1.0/1.2/1.4 Special designed ASTA A-3CY10 timing tool allows to lock and keep the camshaft sprocket in place during replacing the timing belt. The set comes with all necessary parts to work on: 1.0L •VW Up: 1.0 / 1.0 Bluemotion technology / 1.0 Ecofuel •Seat Mii: 1.0 / 1.0 Ecofuel / […]
-
S-PINL2
CAMSHAFT ALIGNING TOOL Tool designed to time 3 cyl. petrol engine 1.2L 12V einzustellen Application: Skoda Fabia: 1.2L 12V, since 2003 VW Polo 1.2L 12V, 2002-AQZZ, BME
-
S-PINL1
CRANKSHAFT LOCKING PIN VAG FSI / TFSI Apply to vehicles / engines: Audi A3 (03-10), Seat Ibiza, Leon, Altea, Skoda Octavia (04-09), Fabia (07-09), Superb(09-10), Roomster (06-09), VW Golf (03-09), Golf Plus (05-09), Jetta (06-09), Passat (05-09), Polo (02-08), Scirocco (09-10), Tiguan (07-09), Touran (9/03), Eos (06-09) Engine Code: AXU, BLG, BAG, BMY, BKG, […]
-
S-1036B
NUT TWISTER SET Suitable for removal thread from broken screws. Diameter: Ø 2, 3, 4, 6, 8, 10 mm
-
S-1036A
NUT TWISTER SET Suitable for removal thread from broken screws. Diameter: Ø 8, 10, 12, 14, 17 mm
-
S-XWAP
WINDSCREEN WIPER ARM PULLER Application: The wiper puller is specially designed for use to remove the rear wiper arms with water jets included in the spindle of motocars. Jaws width:16mm Working range height: 28mm
-
S-CAL150
CALIPER To meausre internal and external diameter and depth. Measurement in mm and inches. Clamp bolt locking Slider Length calipers: 150mm Made of stainless steel