SATRA
-
S-34166SH
16pcs 3/4″ Dr. 6PT Short Hand Socket Set
-
S-TP110AS
110pcs M2-M18 Tap and Die Set
-
S-TA4JP
4PCS LIFTING JACK PADS SET FOR TESLA MODEL 3 & Y & S & X This pad tool is specially made to work with the Tesla vehicle chassis. There are specific jack points for the Tesla vehicle. Without an appropriate pad tool, it may be risked to damage the battery of the vehicle when […]
-
S-EC110M
EXPANDABLE/ COLLAPSIBLE MAGNETIC PARTS TRAY Made of oil-resistant ABS + Silicone with five small strong locating magnets, attaches to any ferrous surface. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Suitable for dismantlers, recovery vehicles and engine re-builders. Lays flat for easy storag Open Dimensions: (W x D x H): 110 […]
-
S-C6DSG
CLUTCH RETAINING BOLT FOR DSG 6- SPEED GEARBOX FOR VAG 02E
-
S-THOR7500ELPG
7.5KW GASOLINE LPG GENERATOR Model S-THOR7500ELPG Type 7.5KW Gasoline/GAS Generator Rated Frequency (Hz) 50Hz Rated Voltage (AC) 230V / 400V Voltage system Condenser compensation system Excitation Self-excitation voltage Rated Output Power (KW) 7.0 Max Output Power (KW) 7.5 Power Factor 1.0 DC Rated output (V-A) 12-8.3 Bore X Stroke (mm) 92×66 Speed (rpm) 3000 Overload Protect […]
-
S-4TOD
TRANSSMISION AND OIL DIPSTICK MERCEDES-BENZ Red: 1,220 mm long for gearbox oil Green: 920 mm long for gearbox oil Blue / Yellow:930 mm long for engine oil
-
S-64ST5
STAINLESS STEEL DRAIN TRAY 600X400X50MM
-
S-IDSP
Diesel Injector Seal Puller Tip diameter: min 4.5mm to max 13.2mm Features: Easy to remove seal. No moving parts to drop into the engine. The tapered threaded end of the tool is screwed into the copper seal to clamp, then tapped firmly with the built-in slide hammer.
-
S-14HS3
3pcs SCREWDRIVER SOCKET ADAPTER SET 1/4″ HEX TO 1/4″, 3/8″, 1/2″ Dr. Material: CR-V 1/4″ Hex to 1/4″ Dr. (Length: 65mm) 1/4″ Hex to 3/8″ Dr. (Length: 65mm) 1/4″ Hex to 1/2″ Dr. (Length: 70mm) Socket wrench locking mechanism. Allow to mount 1/4″, 3/8″ or 1/2″ Dr. socket on a screwdriver or a 1/4″ […]