ASTA TOOLS LIMITED COMPANY

Specjalized Tools For Motorcycles

  • A-MK392A

    REAR AXLE ALIGNMENT TOOL   Length: 692mm. The 90-degree angle and adjustable pointer design allows operator to rest it in the swing-arm pivot and axle.

  • A-MK388

    DAMPING ROD TOOL Allows the damping rod to retrieve effortless after spring installation. Works on Kayaba, Showa and WP inverted forks. Tool provides one rod w/ M10x1.0 end and four brass hex adapters are included M10 x 1.0, M12 x 1.0, M12 x 1.25 and M14 x 1.0. Rod includes covered bleed port to prevent […]

  • A-MK386

    EXTENDED RIM LOCK NUTS WITH BEVELED SPACERS Designed to replace the original lock nut on many motorcycle models with standard rim locks (8mm x 1.25 bolt). Extra Length takes less time to remove or tighten and makes operation easier. It provides beveled spacers to protect rims. Made from 6061 T6 aluminum with 12mm hex head.

  • A-MK383

    STEERING BEARING INSTALLATION TOOL   This tool provides a new and safe approach to steering bearing installation. The aluminum inserts allows lower steering bearings installation quick and accurate. This tool is supplied with one setting driver and three aluminum inserts.

  • A-MK382

    SHOCK BUSHING DRIVER SET:12.5, 14, 16, 18MM   Ideal tool for removing bush from shock. Instructions : Place block on solid bench. Place shock bush over appropriate sized hole. Use appropriate drift to remove the bush. Knock bush out of shock. Use copper mallet to avoid damaging the drift.

  • A-MK381A

    SHOCK BLADDER PULLER   Size : 5/16”-32 x 3/4” This puller threads can reach onto the Schrader valve on the shock reservoir and make the bladder removal be easier.

  • A-MK381

    SHOCK BLADDER PULLER   This puller threads can reach onto the Schrader valve on the shock reservoir and make the bladder removal be easier.  

  • A-MK373

    CRANKCASE SEPARATOR TOOL   It fits most 2-stroke & 4-stroke engines with vertically split cases. It allows a multitude of bolt patterns to be used. It eliminates binding under heavy loads. It provides 6mm mounting bolts (M6 x 1.0 x 200), 8mm mounting bolts (M8 x 1.25 x 200) and crankcase separator center bolt with […]

  • A-MK364

    STEERING STEM BEARING RACE REMOVAL TOOL   It provides a simple way to remove the bearing race on a steering stem. It works on most all stems. Opening size :30mm-68mm. Insert it into the stem. Open it up until it is tight against the stem. From the other end tap the tool out the lip […]

  • A-MK364A

    STEERING STEM BEARING RACE REMOVAL TOOL   It provides a simple way to remove the bearing race on a steering stem. Opening size : 25mm-40mm. Insert it into the stem. Open it up until it is tight against the stem. From the other end tap the tool out the lip on the tool. (as shown […]