PUMP FOR DRILL
Drive shaft: 8mm
Capacity: Max. 2.4mm3/h
Hose connection: 3/4″(19mm)
Pressure: Max. 3BAR
Delivery height: Max. 30M
Suction height: Max. 3M
Temperature of the fluid being pumped: Max. 40°C
Dry run time: Max. 12 seconds
Rotation speed: Max. 3400RPM
Connect to all standard drills.
Simple attachment to pump water by using a drill.
Unplug the drill when it is not in use.
Unplug the drill before assembly and disassembly.
Unplug the drill immediately if water is leaking or has leaked from the pump.
Do not disassemble the pump (do not remove screws).